background image

176

Function Library

6.18 General-Purposed DIO

@ Name

_8102_set_gpio_output – Set digital output

_8102_get_gpio_output – Get digital output

_8102_get_gpio_input – Get digital input

_8102_set_gpio_output2 – Set digital output to P2

_8102_get_gpio_output2 – Get digital output form 

P2

_8102_get_gpio_input2 – Get digital input form P2

@ Description

_8102_set_gpio_output:

The PCI-8102 has 2 digital output channels. By this function, user
could

control the digital outputs.

_8102_get_gpio_output:

This function is used to get the digitl output status.

_8102_get_gpio_input:

PCI-8102 has 4 digital input channels. By this function, user can
get the

digital input status.

_8102_set_gpio_output2:

The PCI-8102 has 16 digital output channels on P2. By this func-
tion, user could control the

digital outputs.

_8102_get_gpio_output2:

This function is used to get the digital output status.

_8102_get_gpio_input2:

PCI-8102 has 16 digital input channels on P2. By this function,
user can get the digital input

status.

Summary of Contents for PCI-8102



















































































































































































































Reviews: