manualshive.com logo in svg

ADLINK Technology PCI-8102, User Manual, Page: 200 / 210

Share
Download
ADLINK Technology PCI-8102 User Manual Download Page 200

190

Connection Example

Notes:

1.

Servo & Stepper: The DIN-68M-J3A provides 2 connection 
methods for each axis: CN1F1 & CN1F2 connectors for Mit-
subishi J3A series servo drivers, and a SJ connector for 
stepping drivers. DO NOT use both connectors at the same 
time.

2.

CN1F1 or CN1F2 cables: One pin-to-pin 50-PIN cables are 
required for connection between the CF1F1(CN1F2) and the 
Mitsubishi J3A driver. It is available from ADLINK, or users 
may contact the local dealer or distributor to get cable infor-
mation.

3.

JP1: Fuse selection. Pin 1-2 short means the board is pro-
tected by fuse. Pin 2-3 short menas the board is not protect-
ed by fuse.

4.

Fuse: The fuse protects from demaging internal circuit. This 
guse can sustain 2A current. Users can buy it in local area 
when the fuse is burnt out.

Summary of Contents for PCI-8102



















































































































































































































Reviews:

No comments