ADLINK Technology PCI-8102 User Manual Download Page 193

Page: 193 / 210

Function Library

183

6.21 Speed Profile Calculation

@ Name

_8102_get_tr_move_profile – Get the relative

trapezoidal speed profile

_8102_get_ta_move_profile – Get the absolute

trapezoidal speed profile

_8102_get_sr_move_profile – Get the relative S-

curve speed profile

_8102_get_sa_move_profile – Get the absolute S-

curve speed profile

@ Description

_8102_get_tr_move_profile:

This function is used to get the relative trapezoidal speed profiles.
By this function, user can get the actual speed profile before run-
ning.

_8102_get_ta_move_profile:

This function is used to get the absolute trapezoidal speed pro-
files. By this function, user can get the actual speed profile before
running.

_8102_get_sr_move_profile:

This function is used to get the relative S-curve speed profiles. By
this function, user can get the actual speed profile before running.

_8102_get_sa_move_profile:

This function is used to get the absolute S-curve speed profiles.
By this function user can get the actual speed profile before run-
ning.

@ Syntax

C/C++(Windows 2000/XP)

I16 _8102_get_tr_move_profile(I16 AxisNo, F64

Dist, F64 StrVel, F64 MaxVel, F64 Tacc, F64

Tdec, F64 *pStrVel, F64 *pMaxVel, F64

*pTacc, F64 *pTdec, F64 *pTconst );

I16 _8102_get_ta_move_profile(I16 AxisNo, F64

Pos, F64 StrVel, F64 MaxVel, F64 Tacc, F64

Summary of Contents for PCI-8102



















































































































































































































Search results

Summary of Contents for PCI-8102

Reviews:

ADLINK Technology PCI-8102, User Manual, Page: 193 / 210

Search results

Summary of Contents for PCI-8102

Reviews: