ADLINK Technology NuIPC cPCI-6760D Series, Manual

Page: 43 / 128

30 Jumpers and Connectors
2.1 Jumpers, Connectors, and LED Indicators on
cPCI-6760D
The jumpers on the cPCI-6760D front board allow users to
configure their CPU module according to their applications needs.
Should you have any questions on the most ideal jumper
configuration best suited to your needs, please contact your dealer
or sales representative. The connectors on the cPCI-6760D front
board allows the user to connect devices such as keyboard,
mouse, VGA, COM port, Ethernet etc.
Note: There are no jumpers for front side bus (FSB) and
CPU speed selection. cPCI-6760D is equipped with a
BGA2 pre-soldered CPU that is mounted during SMT
process on manufacturing.
CAUTION: Some I/O ports support connection either by front or
rear I/O. However connect devices either by front or
rear I/O for one I/O function. Do not connect devices to
one I/O function port on front panel and rear panel
simultaneously. This may cause I/O device or system
module damage and warranty will be void.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com