ADLINK Technology NuIPC cPCI-6760D Series, Manual

Page: 14 / 128

Introduction 1
1 Introduction
This manual contains information on the cPCI-6760D series CPU
module and its related rear I/O transition modules, including cPCI-
R6760D - basic rear I/O transition module for cPCI-6760D and
cPCI-R6760S - super rear I/O transition module (super RTM).
Topics covered in this chapter include:
X
Checklist
X
Descriptions
X
Features
X
Specifications
X
Functional block diagram
X
Mechanical outline drawing
1.1 Checklist
The cPCI-6760D series comply with the PICMG 2.0 Rev. 3.0
CompactPCI specification with 6U single-slot (4 TE/HP) form
factor. The cPCI-6760D series support both front panel I/O and
rear panel I/O. It is not necessary to use the rear board if the
application requires only front panel I/O wiring or special
backplane wiring. The front board (the CPU module) and the rear
board (the rear I/O transition module, RTM) are sold separately.
The standard models: cPCI-6760D/P7 and cPCI-6760D/P8 are
front boards, and the standard models: cPCI-R6760D and cPCI-
R6760S are rear boards.
Front Board
Front board is the CPU module. There are two standard versions
available for cPCI-6760D series module (see section 1.2 for the
model variations comparison table). The default version does not
include any RAM or HDD. However, the CPU module may be
equipped with different capacity of RAM or HDD by request.
Please check your configurations with your dealer and check that
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com