ADLINK Technology NuIPC cPCI-6760D Series, Manual

Page: 23 / 128

10 Introduction
information such as CPU type, CPU speed, internal/external
frequencies, and memory size.
X
Supports Intel pre-boot execution environment (PXE) for
boot from LAN
X
Remote Console: setup console redirection to serial ports
(terminal mode) with CMOS setup access
Host Memory
X
Two 144-pin SO-DIMM sockets, Max. 512MB PC-100
unbuffered SDRAM.
X
Optional ECC support (for volume orders OEM project)
IDE Ports
X
Bus Master IDE controller supports two EIDE interfaces by
J3 and J5 rear I/O for up to four IDE devices, including HDD
and ATAPI CD-ROM drives. Pin assignments on cPCI J3
and J5 support an IDE direct connection feature on the
cBP-6108R, cBP-6105R, cBP-6515R, cBP-6402, and cBP-
6309 backplanes.
X
One 44-pin secondary EIDE connector on the front CPU
module, which can support an onboard 2.5” notebook size
HDD or Flash2000TM flash disk.
X
One CompactFlash type-II socket on removable daughter
board for front CPU module.
X
Two 40-pin EIDE connectors on rear transition module, that
can support PIO Mode 3/4 and Ultra DMA/33 IDE devices.
Note: Due to the BIOS segment limitation, enabling the
remote console function may occupy the same
memory space for other ROM-mapping add-on or
boot-up devices such as Pre-boot Agent of Ethernet
Boot ROM, SCSI Boot ROM, or add-on EIDE Boot
ROM. It is recommended that the user enables only
one ROM-mapping add-on or boot-up device when
enabling the remote console function.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com