ADLINK Technology NuIPC cPCI-6760D Series, Manual

Page: 28 / 128

Introduction 15
Safety Certificate and Test
X
CE, FCC Class B
X
HALT (temperature and vibration stress)
Power Consumption
Note: *1.System forced cooling airflow with 10 CFM is
required for mobile Pentium-III running at 850MHz
and 6 CFM is required for low voltage Pentium-III
running at 700MHz.
2. As environment limitations are different from one
component to another, please refer to the
component specification when mounting a HDD or
PMC module into cPCI-6760D. The operating
temperature was tested when the HDD is cabled
outside the testing chamber, along with the Mobile
Pentium-III 850MHz CPU.
3. The vibration limitation of operation is caused by the
2.5” ATA HDD. Should customers wish to use cPCI-
6760D in a high vibration environment, it is
recommended that the user use a Flash2000 Flash
Disk (FFD series) or CompactFlash Card to replace
the 2.5” ATA HDD.
Configurations +5V +3.3V +12V -12V
Intel® Pentium® III processor - Low Power
700MHz, 256MB with cPCI-R6760D
3.8A 4.5A
228m
A
0mA
Intel® Mobile Pentium® III 850MHz, 512MB
with cPCI-R6760S
6.4A 4.5A
228m
A
0mA
Table 1-3: Power Consumption
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com