ADC AVIDIA SWD4573I1, User Manual

Page: 523 / 658

Chapter 24: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual 497
Deleting IP Routing Table Entries
1 Locate the table row that contains the IP routing entry you want to delete.
Click and if necessary to view the entire table. displays the beginning of the
table. displays the next page of the table.
2 Click the Delete checkbox next to the row that contains the information you want to delete
3 Click the Delete Checked Row(s) button.
A confirmation dialog displays.
4 Do one of the following:
• Click OK to delete the selected table entry and return to the IP Routing Table window.
• Click Cancel to return to the IP Routing Table window without deleting the table entry.
M
ODIFYING
RIP C
ONFIGURATION
The RIP Configuration Table displays information about the Routing Information Protocol
(RIP) used for each routing session. You configure RIP information initially during session
configuration, however you can modify it using the following procedures.
You modify RIP information from the RIP Configuration Table window. Do one of the following
to open the RIP Configuration Table window:
•
In the Site Map Navigation window, click RIP Configuration .
•
In the Tree Navigation window, click Configuration Management , Bridge/Route , RIP
Configuration .