ADC AVIDIA SWD4573I1, User Manual

Page: 252 / 658

Configuring Frame Relay FRF.5 Circuits
226 Avidia System Configuration and Management User Manual
TxLpM The Tx LP mode, which determines the content of the
FR-SSCS PDU header DE and ATM cell ATM CLP
fields.
1—The frame header DE field is copied in the
FR-SSCS PDU header DE field and mapped into the
ATM CLP field of every ATM cell generated by the
frame.
2—The frame header DE field is copied into the
FR-SSCS PDU header DE field. The ATM CLP field of
every ATM cell generated by the segmentation process
of the AAL5 PDU containing the information of that
frame is set to the CLP mask value.
CLPM The CLP Mask setting, which determines the content
of the ATM cell CLP field when Tx LP mode is set to 2.
0—The network cannot discard cells.
1—The network can discard cells.
RxLpM The Rx LP mode, which determines the loss priority
settings when transmitting from ATM to frame relay.
1—The frame relay header DE field is set if the CLP
field of one or more ATM cells of a frame is set to 1 or
if the FR-SSCS PDU header DE field is set to 1.
2—The frame relay header DE field is copied into the
FR-SSCS PDU header DE field, independent of the
ATM CLP field value received.
CIR The committed information rate (circuit throughput)
value in seconds (range: 0-144000)
Be The excess burst value, which is the maximum
number of uncommitted data bits that the network will
attempt to deliver (range: 0-144000).
Bc The committed burst value, which is the maximum
number of data bits that the network agrees to transfer
under normal conditions during the measurement
interval (range: 0-144000).
TPIx The traffic profile index.
Status Box Description