ADC AVIDIA SWD4573I1, User Manual

Page: 161 / 658

Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 135
Example
::clock=> show 5
The following screen illustrates an example of the show clock command.
Modifying IDSL Port Configurations
Each IDSL port is automatically assigned a default configuration. This procedure describes how
to modify the configuration to reflect the desired service.
1 You configure IDSL ports from the
::idsl=>
prompt. From the
::root=>
prompt,
type the following command then press to display the
::idsl=>
prompt.
configuration idsl
2 From the
::idsl=>
prompt, type the following command then press to display
the
::line=>
prompt.
profile line
3 Type
show
then press to display the configured line profiles.
4 Note the index number of the line profile you want to assign to the channel.
5 Type the following command then press to display the
::alarm=>
prompt.
configuration idsl profile alarm
6 Type
show
then press to display the configured alarm profiles.
7 Note the index number of the alarm profile you want to assign to the channel.
8 Type the following command then press to display the
::idsl=>
prompt.
configuration idsl
9 Type the set command in the following format then press .
set <port> <lpindex> <apindex> (up|down) [<circuit id>]
::clock=> show 5
IDSL clock source for slot 5: local
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER