ADC AVIDIA SWD4573I1, User Manual

Page: 159 / 658

Chapter 6: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 133
Deleting IDSL Alarm Profiles
1 From the
::alarm=>
prompt, type
show
then press to display the configured
IDSL alarm profiles.
2 Note the index number of the profile you want to delete.
3 Type the delete command in the following format then press .
delete <index>
Parameter
<index>
The index number of the alarm profile you want to delete.
Example
::alarm=> delete 3
C
ONFIGURING
IDSL S
ERVICE
You assign IDSL service for the card by specifying the transmit clock source and for each port
by specifying a line profile and alarm profile. Before configuring an IDSL port, make sure you
have:
You cannot delete profiles that are assigned to ports. You cannot delete the
default profile.
Set up the desired IDSL line profile (see
“Configuring IDSL Line Profiles” on page 127
for instructions).
Set up the desired IDSL alarm profile (see
“Configuring IDSL Alarm Profiles” on
page 130 for instructions).
ENTER
ENTER