ADC AVIDIA SWD4573I1, User Manual

Page: 409 / 658

Chapter 19: Configuring System Parameters
Avidia System Configuration and Management User Manual 383
2 If the Boot Mode is set to network:
a In the Boot Server IP Address box, type the IP address of the TFTP server on which the
image file you want to boot is stored (format xxx.xxx.xxx.xxx).
b In the Boot File box type the complete path and file name, including file name
extension, of the image file you want the management card to boot.
The management card image file name is amc.bin. If the image file is stored in a
directory other than the TFTP server default directory, you must specify the path. See
your TFTP server documentation to determine the required path syntax. If you do not
specify the file name, the management card attempts to boot the available image files
in the following order:
amc.new—An image file that has been downloaded from a TFTP server but has not
yet been booted or validated. Once the file has been validated, the file name extension
is automatically changed to .bin.
amc.bin—The image file that came preinstalled on the management card or an image
file that was downloaded from a TFTP server and has been booted and validated by the
management card.
amc.alt—A backup image file you can create prior to downloading a new image file.
3 Do one of the following:
• To activate the new settings, click Set .
• To cancel the new settings, click Get . You can only cancel the new settings if you have
not yet clicked Set .