ADC AVIDIA SWD4573I1, User Manual

Page: 433 / 658

Chapter 20: Configuring Subscriber Services
Avidia System Configuration and Management User Manual 407
Adding IDSL Line Profiles
You add IDSL line profiles from the IDSL Line Configuration Profile Table window.
1 In the Rate box, select the desired transmission rate on the link in kbps (64, 128, or 144).
2 In the Performance Monitor box, select the mode ( Path or Segmented ).
The mode determines how IDSL current performance data (see “Monitoring IDSL
Performance” on page 515 ) and diagnostic data (see “Managing IDSL Diagnostics” on
page 568 ) are collected.
• In Path mode, statistics are reported for each segment of the connection path (loop)
cumulatively. In the customer direction, node 0 (Avidia system) reports statistics for
the first segment, node 1 reports statistics for the first and second segments, etc. In the
network direction, node 0 (Avidia system) reports statistics for all the segments, node
1 reports statistics for all but the first segment, etc.
• In Segmented mode, statistics are reported for each segment of the connection path
(loop). In both the customer and network directions, node 0 (Avidia system) reports
statistics for the first segment, node 1 reports statistics for the second segment, etc.
3 In the SES Threshold box, type the severely errored second threshold in seconds.
The SES Threshold is the number of block errors required for defining a severely errored
second. The range is 1 to 15, with 3 as the default. A block error is generated any time there
is a CRC violation detected on an IDSL superframe.
4 Click Add to add the IDSL line profile.