ADC AVIDIA SWD4573I1, User Manual

Page: 37 / 658

Avidia System Configuration and Management User Manual 11
2
P
REPARING FOR
S
YSTEM
C
ONFIGURATION AND
M
ANAGEMENT
Follow these steps to prepare for initial Avidia system configuration. To configure an Avidia
system that is already in service, begin with
Step 3 .
1 Connect a terminal or PC running terminal emulation software to the management card
craft port. See
“Step 1: Connect a Terminal and Log On” on page 12 .
2 Use the Avidia command-line interface to set the management card IP address. See “Step
2: Set the Management Card IP Addresses” on page 13 .
3 Determine whether you want to use the command-line interface or the Web interface to
configure and manage the system. See
“Step 3: Select a Management Interface” on page 15 .
4 Determine which method you want to use to access the selected management interface. See
“Step 4: Select an Access Method and Complete Setup” on page 15 .