ADC AVIDIA SWD4573I1, User Manual

Page: 100 / 658

Setting Up Connections
74 Avidia System Configuration and Management User Manual
Cell-based Services
Set up service for either an ADSL or SDSL cell-based card using one of the following sections.
ADSL
The following shows the configuration process for setting up ADSL cell-based service.
• Create one or more ADSL line profiles. See “Configuring ADSL Line Profiles” on
page 100 (command-line interface) or “Configuring ADSL Line Profiles” on page 386
(Web interface).
• Create one or more ADSL alarm profiles. See “Configuring ADSL Alarm Profiles” on
page 104 (command-line interface) or “Configuring ADSL Alarm Profiles” on page 388
(Web interface).
• Provision service for the ADSL card. Configure the ports, including assigning the ADSL
line and alarm profiles to ADSL ports. See
“Configuring ADSL Service” on page 109
(command-line interface) or “Configuring ADSL Service” on page 391 (Web interface).
• Create the cross connect through the Avidia system from the line card to the ADSL
cell-based card. See
“Configuring PVCCs” on page 170 (command-line interface) or
“Configuring PVPCs” on page 433 (Web interface) for more information.
Cell-based SDSL
To configure SDSL cell service, you must:
• configure SDSL cell line profiles. See “Configuring SDSL Cell Line Profiles” on page 119
(command-line interface) or “Configuring SDSL Cell Line Profiles” on page 399 (Web
interface).
• configure SDSL cell alarm profiles. See “Configuring SDSL Cell Alarm Profiles” on
page 121 (command-line interface) or “Configuring SDSL Cell Alarm Profiles” on
page 401 (Web interface).
• configure SDSL cell ports. See “Configuring SDSL Cell Service” on page 124
(command-line interface) or “Configuring SDSL Cell Service” on page 404 (Web
interface).
• establish ATM connections between ports across the Avidia chassis. See “Configuring
PVCCs” on page 170 (command-line interface) or “Configuring PVPCs” on page 433
(Web interface) for more information.