ADC AVIDIA SWD4573I1 User Manual Download

Page: 562 / 658

Opening the Interface Window

536

Avidia System Configuration and Management User Manual

PENING

THE

NTERFACE

INDOW

You monitor all physical interfaces monitor the interfaces by slot.

Do one of the following:

•

In the

Site Map Navigation

window, click

Physical Slot Interfaces

•

In the

Tree Navigation

window, click

Performance Monitoring

Statistics

Physical Slot

Interfaces

The

Physical Slot Interfaces (By Card) - Slot Selection

window displays.

Select the slot you want to monitor, then click

. Click

Cancel

to discontinue this

procedure.

A window

displays the interface data for the selected slot. Each physical interface window

displays some combination of the following information.

Information

Description

Slot and Port Number

The slot and port number of the interface.

Interface Description

A text string describing the name of the interface manufacturer,
product name and version.

Interface Type

The type of interface. For example: ADSL, SDSL, Ethernet.

MTU

The size of the largest datagram that can be sent or received on
the interface, specified in octets.

Speed

An estimate of the interface current bandwidth in bits per second.

Summary of Contents for AVIDIA SWD4573I1



















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AVIDIA SWD4573I1

Reviews:

Related manuals for AVIDIA SWD4573I1

Brands by name

Popular brands

ADC AVIDIA SWD4573I1, User Manual

Search results

Summary of Contents for AVIDIA SWD4573I1

Reviews:

Related manuals for AVIDIA SWD4573I1

Brands by name

Popular brands