manualshive.com logo in svg

Adaptec MAN-00005-UG, Installation And User Manual

The Adaptec MAN-00005-UG is a versatile and user-friendly product that comes with an Installation and User Manual. This comprehensive manual provides step-by-step instructions to assist users in setting up and operating the product. Download this manual for free from manualshive.com and empower yourself with valuable insights for a seamless experience.

Share
Download
background image

© 2003, Adaptec, Inc.

 

© 2003, 2002 LSI-Logic Corporation

17

Chapter 2

Installation and Startup

For complete installation and startup information, see the PDF version of the 

Spheras Storage Director Software: 

Installation and User’s Guide 

 located on the distribution CD ROM.

This section assumes that the network administrator for your site will be performing these installation procedures. 

Before installing the Spheras Storage Director Server and Client, read 1.4.3 Spheras Storage Director Requirements on 
page 15 section.  This checklist provides you with important hardware, software, and performance-related suggestions. 

If you want to update your Spheras Storage Director software, go to 2.7 Updating Your Spheras Storage Director Server 
and Client on page 41.

2.1

Pre-Installation requirements

Spheras Storage Director Server Requirement

You must install one of the supported HTTP servers before installing the Spheras Storage Director Server.  (For a list of 
the supported HTTP servers, see 1.4.4 Server Requirements on page 15.)  An HTTP server is used for a remote system to 
download and execute the Spheras Storage Director Client applet.  The HTTP server allows a Spheras Storage Director 
Server to be remotely accessed by various client computers.

Note:

On Solaris systems, the Apache HTTP server is included on the installation CDs and is commonly installed 
when the Solaris operating system is installed.

It is outside the scope of this document to describe the installation of an HTTP server. See your HTTP server 
documentation for installation instructions.  See Figure 1 Spheras Storage Director Client and Server Relationship on 
page 14 for more information about the relationship between the server and client.

2.1.1

Spheras Storage Director Client Requirement

 Before installing the Spheras Storage Director Client, ensure that a web browser is installed on the client system.  For a 
list of supported browsers, see 1.4.5 Client Requirements on page 15.  Launch the browser to ensure that it is working.  
If not, consult your browser installation manual for troubleshooting information.

2.1.2

General Recommendations and Requirements

Important!

This section contains requirements and recommendations to ensure proper operation and optimum 
performance of the Spheras Storage Director software.

You must install Spheras Storage Director Software on a system that is running a supported operating system.  For detail 
on supported systems, see 1.4.3 Spheras Storage Director Requirements on page 15.

The Spheras Storage Director Client can use any network connection.  However, for optimum performance, it is 
recommended that you use a network connection that provides a 100Base-T or better data transfer rate.

If you have multiple HTTP servers installed on the same system, they must be configured to communicate on different 
ports.  Otherwise, the Spheras Storage Director client may not start.

For optimum performance, the server component and the client component should be installed on physically separate 
systems.  While it is possible to install the server and client components on the same system; it is not recommended and 
may cause performance-related problems.

Summary of Contents for MAN-00005-UG














































































































































































































































Reviews:

No comments

Related manuals for MAN-00005-UG

3Com 3C19250 - USB Ethernet Network Interface... User Manual preview
3C19250 - USB Ethernet Network Interface...
Brand: 3Com Pages: 16
GARDINER TECHNOLOGY GARDTEC SPEECH DIALLER Installation & Programming Instructions preview
GARDTEC SPEECH DIALLER
Brand: GARDINER TECHNOLOGY Pages: 38
Altigen MaxACD Administrator Manual preview
MaxACD Administrator
Brand: Altigen Pages: 261
Drobo How-To Manual preview
How-To
Brand: Drobo Pages: 6
F-SECURE ANTI-VIRUS FOR WINDOWS SERVERS 9.00 Administrator'S Manual preview
ANTI-VIRUS FOR WINDOWS SERVERS 9.00
Brand: F-SECURE Pages: 48
Mobile Crossing WayPoint Map Loader User Manual preview
WayPoint Map Loader
Brand: Mobile Crossing Pages: 32
Promise Technology PAM User Manual preview
PAM
Brand: Promise Technology Pages: 84
Red Hat CERTIFICATE 7.3 RELEASE NOTES Release Note preview
CERTIFICATE 7.3 RELEASE NOTES
Brand: Red Hat Pages: 24
Red Hat ENTERPRISE LINUX 4.5.0 - Reference Manual preview
ENTERPRISE LINUX 4.5.0 -
Brand: Red Hat Pages: 434
QMS CF 2215 User Manual preview
CF 2215
Brand: QMS Pages: 50
Olympus 141670 - DS 330 Digital Voice Recorder Instructions Manual preview
141670 - DS 330 Digital Voice Recorder
Brand: Olympus Pages: 76
MACROMEDIA FLASH MX 2004-DATA Tutorials Manual preview
FLASH MX 2004-DATA
Brand: MACROMEDIA Pages: 20
Juniper CARE PLUS Datasheet preview
CARE PLUS
Brand: Juniper Pages: 8
Xerox FREEFLOW 701P46740 Security Manual preview
FREEFLOW 701P46740
Brand: Xerox Pages: 38
Barracuda Networks 4 Administrator'S Manual preview
4
Brand: Barracuda Networks Pages: 71
Samsung ML 2851ND - B/W Laser Printer Manual preview
ML 2851ND - B/W Laser Printer
Brand: Samsung Pages: 30
MACROMEDIA BREEZE PRESENTER Manual preview
BREEZE PRESENTER
Brand: MACROMEDIA Pages: 106
Canon PowerShot SX10 IS User Manual preview
PowerShot SX10 IS
Brand: Canon Pages: 464

Brands by name

Popular brands

Load more brands