manualshive.com logo in svg

Adaptec MAN-00005-UG, Installation And User Manual

The Adaptec MAN-00005-UG is a versatile and user-friendly product that comes with an Installation and User Manual. This comprehensive manual provides step-by-step instructions to assist users in setting up and operating the product. Download this manual for free from manualshive.com and empower yourself with valuable insights for a seamless experience.

Share
Download
background image

 

76

Spheras Storage Director Installation and User Guide

 3  Select 

Basic

. 

Figure 50

Figure 50 Controller Properties Dialog Box: Basic

In the Basic tab, you have the following options:

Enable read ahead:

When enabled, reads data to the next stripe boundary (based on stripe size), and 
retains in cache any data beyond the size of the actual read request.

The Read Ahead function improves data retrieval performance by allowing the 
controller to read into cache a full stripe of data at a time.  This greatly improves the 
percentage of cache hits.  For small transfers, the read ahead algorithm helps with 
performance.  
For example, if the stripe size is set to 8 KB and the host requests 1 KB of data, 
when this function is enabled the controller reads the full 8 KB.  When the host 
requests the next 1 KB block, that data is already in the controller’s cache. This 

Summary of Contents for MAN-00005-UG














































































































































































































































Reviews:

No comments

Related manuals for MAN-00005-UG

MACROMEDIA COLDFUSION MX 61-CFML Quick Reference preview
COLDFUSION MX 61-CFML
Brand: MACROMEDIA Pages: 34
National Instruments NI-DNET User Manual preview
NI-DNET
Brand: National Instruments Pages: 86
Arturia Prophet V User Manual preview
Prophet V
Brand: Arturia Pages: 117
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.5 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 4.5
Brand: Red Hat Pages: 78
Red Hat CERTIFICATE 7.2 RELEASE NOTES Release Note preview
CERTIFICATE 7.2 RELEASE NOTES
Brand: Red Hat Pages: 24
Red Hat CERTIFICATE SYSTEM 7.2 - MIGRATION GUIDE Administration Manual preview
CERTIFICATE SYSTEM 7.2 - MIGRATION GUIDE
Brand: Red Hat Pages: 512
Tascam GigaEditor 4 User Manual preview
GigaEditor 4
Brand: Tascam Pages: 210
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Release Note preview
STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008
Brand: Juniper Pages: 14
MGI PhotoSuite Manual preview
PhotoSuite
Brand: MGI Pages: 19
GRASS VALLEY AURORA INGEST 7 Datasheet preview
AURORA INGEST 7
Brand: GRASS VALLEY Pages: 4
GRASS VALLEY Aurora Browse Upgrade Instructions preview
Aurora Browse
Brand: GRASS VALLEY Pages: 42
GRASS VALLEY K2 SUMMIT Datasheet preview
K2 SUMMIT
Brand: GRASS VALLEY Pages: 4
FieldServer FS-8700-23 Driver Manual preview
FS-8700-23
Brand: FieldServer Pages: 11
Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010 User Manual preview
507B1-90A211-1301 - NavisWorks Manage 2010
Brand: Autodesk Pages: 472
Autodesk AUTOCAD ELECTRICAL 2005 Getting Started preview
AUTOCAD ELECTRICAL 2005
Brand: Autodesk Pages: 88
Tascam HS-8 Software Manual preview
HS-8
Brand: Tascam Pages: 13
ACD Systems ACDSEE 12 User Manual preview
ACDSEE 12
Brand: ACD Systems Pages: 232
Canon FS 2710 User Manual preview
FS 2710
Brand: Canon Pages: 80

Brands by name

Popular brands

Load more brands