Adaptec MAN-00005-UG, Installation And User Manual, Page: 198 / 237

© 2003, Adaptec, Inc.
199
To repair an enclosure, first see 6.2.2 Viewing Event Details on page 111. The event details tell you the event ID and
give you a description of the event that caused the enclosure to need repair. Using this information, take measures to fix
the problem:
•
If the BBU needs to be reconditioned or power is low, recondition the BBU.
•
Remove access to the enclosure and power down.
•
Check, all cable connections, to be sure none is disconnected or broken.
•
Replace any parts that need to be replaced. Such as the fan, power supply, or BBU.
7.11.7
Repair a Server
Events that may cause a server to need repair:
•
Lost connection to server
•
Server is down
•
One or more controllers visible to the server are having problems.
To repair a server:
•
Check if the server’s status indicates that the connection was lost. If this is the case, then the server may be down,
the network connection to it is not working, or the Spheras Storage Director Server is not running on that server.
Try reconnecting to the server.
•
If the server’s connection is good, then check if any of the server’s controllers are in a critical state. In the
navigation area, expand the server. Check if any controllers are in a critical state. If so, then one or more controllers
are having problems. Expand the problem controller’s tree to view its components. Click on the component that is
in a critical state and view the repair action for it.