Adaptec MAN-00005-UG, Installation And User Manual

Page: 72 / 237

© 2003, Adaptec, Inc.
73
; EVENT_ELEMENT_ID (world wide names and/or serial numbers of devices involved
;in the event (eg. “Controller world wide name:2000 0080e5 11ea07”)
Locate the “Page On Call Manager” section in the file. Format this section of the cfg.ini file by using the following
information as an example. The example below describes an Event Alert Application, which launches the application
c:\pagemgr.bat and passes it the user-defined parameters:
[EventAlertApplication#Page On Call Manager]
UserDefinedParameters=AT&F&C1&D2L1 ATDT 555-1234 # EVENT_ID EVENT_SEVERITY
EVENT_ADDRESS EVENT_ELEMENT_ID
SeverityCombination=24
ApplicationName=C:\pagemgr.bat
When you are finished editing the appropriate sections of the cfg.ini file, click File->Save to save your changes.
Click File->Exit to close the text editor.
5.3 Setting and Modifying Controller Properties
The Controller Properties dialog box allows you to view or change controller properties. Each Disk Array Controller is
shipped from the factory with default settings, which have been found to work well in a majority of applications and
environments. However, no two environments are the same, and you may want to modify certain controller properties
before preparing your array. Follow the steps below to view or change your controller properties.