manualshive.com logo in svg

Adaptec MAN-00005-UG, Installation And User Manual, Page: 60 / 237

Share
Download
Adaptec MAN-00005-UG Installation And User Manual Download Page 60

© 2003, Adaptec, Inc.

61

accessed on those drives.  Disk scrubbing is not enabled by default.  See 7.4 Disk 
Scrubbing on page 188 for more information.

4.3.4

Event Menu

Figure 33

Event menu

The Event Menu contains the following options:

Properties:

Allows you to view or change event log properties and event handling settings.

Clear Log:

Clears the event log of the selected server.

Print Log:

Opens a browser window to allow printing of the event log.

Event Details:

Displays information about the generated events for the selected server.

Event Filter:

Controls the level of severity of the messages that are displayed.

4.3.5

Tasks Menu

Figure 34

Task menu

The   Task Menu has the following option: 

Cancel:

Cancels the selected task, such as a rebuild or a consistency check. Controller-initiated tasks, such as a 
Background Initialization, cannot be cancelled.

4.3.6

Logical Menu

Figure 35

Logical menu

Summary of Contents for MAN-00005-UG














































































































































































































































Reviews:

No comments