manualshive.com logo in svg

Adaptec MAN-00005-UG, Installation And User Manual, Page: 13 / 237

Share
Download
Adaptec MAN-00005-UG Installation And User Manual Download Page 13

 

14

Spheras Storage Director Installation and User Guide

Figure 1

Spheras Storage Director Client and Server Relationship

This diagram shows how the client talks with the server.  Spheras Storage Director uses  Java RMI (Remote Method 
Invocation) as Internet connectivity paths that are used when the client talks with the server that launched it (Server B).  
It also shows how Server B will talk to the other servers in response to the user interacting with the other servers via the 
client machine.

1.4

Configuration Functions

Configuring a disk array is easily performed using the Configure Unused Storage with Assistance wizard.  This wizard 
simplifies the process of setting up or reconfiguring a disk array.  Follow the instructions as presented on the dialogs, 
answer a few questions, and the Configure Unused Storage with Assistance wizard does the rest.  Use the Configure 
Unused Storage Manually Wizard for more control over how arrays are defined.

1.4.1

Monitoring Functions

The Spheras Storage Director Server component collects and disseminates information on resource utilization and array 
status.  The Spheras Storage Director Client organizes this information through a graphical display.  Errors and events 
are recorded in a log file and in the event content table.  If a problem is serious enough to warrant immediate attention, 
operators can be notified by the Spheras Storage Director by using applications such as pagers and email.

1.4.2

Maintenance Functions

The Spheras Storage Director Client manages or performs maintenance on individual disk arrays and drives (with 
appropriate authentication), again through use of the graphical user interface.  This includes removing physical devices 
from operation in a functioning disk array (also known as “stopping” or off-lining a drive), rebuilding drives, selecting 
hot spares, and initiating a consistency check (or parity) on arrays that are configured to support redundancy.  The 
Spheras Storage Director Server executes the management instructions specified by the Spheras Storage Director Client.

Summary of Contents for MAN-00005-UG














































































































































































































































Reviews:

No comments