manualshive.com logo in svg

Adaptec MAN-00005-UG, Installation And User Manual, Page: 51 / 237

Share
Download
Adaptec MAN-00005-UG Installation And User Manual Download Page 51

 

52

Spheras Storage Director Installation and User Guide

 4 From the menu bar click Group->Replicate or right-click Group->Replicate in the navigation area.  The Replicate 

Information dialog box opens confirming the replication. 

Figure 26

Replicate Information Dialog Box

  5 Click  OK.

Replication can also be done when creating a new server group.  See 3.4 Adding a New Server  on page 48.

3.7

Editing the iHosts File

The iHosts file contains the IP addresses for controllers that are not a part of the subnet of your Spheras Storage Director 
Server.  This is referred to as out of band management.  Editing an iHost file allows you to add IP Addresses to the file.  
By adding these IP Addresses, your Spheras Storage Director Server will be able to discover other controllers. 

Note:

If a controller is connected to a host with both Fibre Channel and Ethernet (TCP/IP) connections, the Ethernet 
connection takes precedence and the Fibre Channel connection is not used.

To edit an iHosts File follow these steps.

Summary of Contents for MAN-00005-UG














































































































































































































































Reviews:

No comments