Now place the last two coals
A in the two centre spaces
as shown.
2 7
SECTION 09
FITTING THE DECORATIVE FRAME
The appliance is supplied with a decorative frame, the frame attaches to the firebox
as a three piece or one piece clip-on unit.
Place the magnets supplied to the outer frame of the fire box.
A plastic protective coating may be applied to the face of the frame assembly, which
should be removed at this stage; the one piece unit can be placed in position.
With the three piece unit you should start with the side pieces of the clip-on assembly,
these should be pushed into position first, followed by the top bar, which should
overlap the sides.
IMPORTANT NOTE: Due to the possibility of sharp edges, care should be taken when
handling the three piece frame components, the use of protective gloves is
recommended.
Place the fire front/ fret into position in front of the fire and slide the ashpan door into
place. The fire front/fret shown in these instructions may differ from the one supplied
with the appliance, we strongly recommend you use a fire front/fret supplied by Adam
fires as these products will have been tested with the appliance, although other fire
front/frets will be compatible.
COMMISSIONING THE APPLIANCE
Turn on and test the gas supply up to the fire for any leaks, in accordance with current
Approved Codes of Practice (ACOPs)
OPERATING THE APPLIANCE
(See Section 18 Users Instructions)
Summary of Contents for Eco4
