1 8
SECTION 7.1
Note: In some instances the plastic wall plugs supplied may need to be substituted with
fibre wall plugs, if the appliance is likely to heat the screw eyes.
If the fireplace does not allow for the exact layout shown, the eyebolts should be fixed
to give a similar configuration as possible.
Thread the tensioning cable through the holes at the top of the firebox, then through
the two screw eyes in the top position and then through the one at the lower position,
back through the lower hole in the firebox as shown in the diagram.
Through holes at the
top of the fire box
Through
Screw eyes
Through Screw eye
at the bottom and
through hole near
base of the firebox
Open out Tab’s with
screwdriver to
accept the cable tie
Summary of Contents for Eco4
