2 3
SECTION 08
Note: Please ensure that the
support brackets are level and
that there is a minimum gap of
5mm between the burner and
the bottom of the rear matrix.
This must not touch the burner
as this could cause the fire to
burn incorrectly, which may
cause damage to the fire and
malfunction.
BURNER
FRONT MATRIX
PILOT ASSEMBLY
Note: Please ensure that
there is a gap between
the back of the front
matrix and the pilot
assembly where
applicable. This is to
ensure correct operating
of the pilot and O.D.S
system. This must not
touch the assembly as this
will cause the fire to
operate incorrectly and
cause damage to the fire.
Place front matrix coal
support into brackets fitted.
Summary of Contents for Eco4
