17
ActronAir
is constantly seeking ways to improve the design of it’s products, therefore specifications are subject to change without notice.
Copyright © 2017 Actron Engineering Pty. Ltd.
UNIT PREPARATION
SUPPLY ANGLE ASSEMBLY
RETURN ANGLE ASSEMBLY
1
Assemble supply angle short plate and supply
angle long plate using the provided rivet as shown
above.
Materials:
- supply-angle short plate x 2 pcs.
- supply angle long plate x 2 pcs.
- rivet x 8 pcs.
Attach the supply angle assembly onto supply air
opening using provided screws as shown below.
Material
- stainless steel screw 12G x 5/8 x 14 pcs.
NOTE:
1) All screws, rivets and supply return plates are supplied with the unit.
2) All items are packed and located inside return air plenum (either beside indoor plug fan or on the filter rail)
3) This assembly instruction is also applicable to the following unit options:
(a) supply air side, (b) supply air front, (c) return air side and (d) return air front.
4) Tools required (not supplied): rivet gun and phillips screw driver.
2
1
Assemble return angle short plate and return angle
long plate using the provided rivet as shown above.
Materials:
- return angle short plate x 2 pcs.
- return angle long plate x 2 pcs.
- rivet x 8 pcs.
Attach the return angle assembly onto supply air
opening using provided screws as shown below.
Materials:
- stainless steel screw 12G x 5/8 x 18 pcs.
2
supply angle assembly
return angle assembly
S/A
R/A
SUPPLY AND RETURN ANGLE PLATE INSTALLATION
IMPORTANT NOTE
:
Supply Air / Return Air angle with
optional Left Hand or Right Hand side
configuration are not factory fitted.
These are to be field assembled and
fitted by the installer.
REVISIONS SA/RA ANGLE ASSEMBLY/INSTALLATION INSTRUCTIONS:
1.
PCR2242 - Added note re: SA/RA bottom configuration are not factory fitted - MW
2.
3.
4. .
