19
Basic operation
Turning off the projector
1
Press the ON/STAND-By button on the side control or on the
remote control, and “Power off?” appears on the screen.
2
Then, press the ON/STAND-BY button again in 4 second.
The POWER indicator starts to flash red, and the cooling fans
keep running (You can select the level of fans’ quietness and
running speed.). Now you can unplug the AC power cord even
if the fans are still running.
Power off
？
“Power off ” disappears
after 4 seconds.
3
When the projector has cooled down enough to be turned on
again, the POWER indicator stops flashing.
To maintain the lamp life, once you turn the projector
on, wait at least 5 minutes before turning it off.
Do not operate the projector continuously without reset.
Continuous use may result in shortening the lamp life.
Turn off the projector and let it stand for about an hour
in every 24 hours.
√
Note:
●
When the Auto start function is “On,” this projector is turned
on automatically by connecting the AC power cord to an AC
outlet .
●
The running speed of cooling fans is changed according to the
temperature inside the projector.
●
Do not put the projector in a case before it is cooled enough.
●
If the WARNING indicator flashes or emits a red light,
see “Warning Indicator”.
●
While the POWER indicator is flashing, the lamp is
being cooled down and the projector cannot be turned
on. Wait until the POWER indicator turns red to turn on
the projector again.
●
The fan rotation will terminate directly if the AC power cord
is unplugged immediately after the projector is turned off.
●
The projector can be turned on after the POWER indicator
turns red. The waiting time to restart will be shortened when
the normal power-off processing for fan cooling is completed,
comparing with the time the AC power cord is immediately
unplugged after the power-off.
