background image

SQUARE FORMAT DIMENSIONS (screens with ^ have 2" standard black drop at top)

Sizes

*Overall Length of Case

Approx. Ship. Wt.

H x W

Cm

In.

Cm

Lbs.

Kg

50" x 50"

127 x 127

76

1

/

2

"

194

144

65.3

60" x 60"

152 x 152

86

1

/

2

"

220

154

69.9

70" x 70"

178 x 178

96

1

/

2

"

245

164

74.4

84" x 84"

213 x 213

110

1

/

2

"

281

184

83.5

6' x 8'^

183 x 244

122

1

/

2

"

311

209

94.8

8' x 8'

244 x 244

122

1

/

2

"

311

211

95.7

7' x 9'^

213 x 274

134

1

/

2

"

342

234

106.1

9' x 9'^

274 x 274

134

1

/

2

"

342

237

107.5

8' x 10'^

244 x 305

146

1

/

2

"

372

260

117.9

10' x 10'^

305 x 305

146

1

/

2

"

372

263

119.3

9' x 12'^

274 x 366

170

1

/

2

"

433

311

141.1

12' x 12'

366 x 366

170

1

/

2

"

433

316

143.3

10'6" x 14'^

320 x 427

194

1

/

2

"

494

403

182.8

14' x 14'

427 x 427

194

1

/

2

"

494

410

186.0

12' x 16'^

366 x 488

218

1

/

2

"

555

459

208.7

16' x 16'

488 x 488

218

1

/

2

"

555

469

212.7

*Add 7" to overall case length for mounting brackets.
Overall case length dimensions ±

1

/

4

".

Specifications subject to change without notice.
Detail dimensional drawings, wiring diagrams and installation instructions available upon request.
Custom formats and sizes available upon request.

SPECIFICATION DATA

S

UGGESTED SPECIFICATIONS: 

_________________________ projection screen(s),  __________________ (H) x  ________________

(W), electrically

operated 120 volt AC (60 Hz) not more than 2.2 amp. Three wire quick reversal motor especially designed for the purpose, to be ball
bearing and oiled for life. With automatic thermal overload cut-out and integral interlocking gears. To have pre-set but accessible limit
switches to automatically stop screen surface in the “down” position.  Stop action to be positive to prevent coasting . The roller to be
of rigid metal at least 3" in diameter (to be used on screens 12' and under in width) or 5

3

/

4

" in diameter (on screens over 12' in width.

Roller to be mounted on two heavy duty brackets equipped with self-aligning bearings. Screen surface to be flame retardant and
mildew resistant fiberglass with black masking borders standard. Case to be of wood, with double top for extra rigidity and strength.
Motor compartment to be metal lined. A section of the bottom of the case shall be equipped with hinges and connected to the drive
mechanism so that it opens and closes automatically with the lowering and raising of the screen surface. The door will lift to the
closed position where a micro switch shall cut off the electrical current to the motor. Balance of the bottom panel shall be pegged to
manual opening to provide access. Hinges shall be mounted to allow matching of the bottom panel to the ceiling. 

Specify Type 1 and 2

or Type 3 hinge, as required. 

Case to be furnished with a black primer coat, ready to accept final finish by others. To be complete with 3

position control switch with cover plate. Recessed installation requires access to motor. Screen shall be listed by Underwriters’
Laboratories and CSA. 

Matte White:

Seamless in all standard sizes.

High Power

®

Available in sizes up to 9' x 12'. Horizontal seam required when both dimensions exceed 6'.

WHEN ORDERING, MARK APPROPRIATE SELECTIONS:
Select method of installation:

Type 1 and  2 - Offset or Flush Mounting

Type 3 - Extended Mounting

Select viewing surface:

Matte White

High Power

®

Greenguard

®

and Greenguard

®

Children and Schools

Certified.

Options:

Extra Drop available to lower picture area more than normal.
Specify total drop at top _____  (black or white) or at bottom
_____ (black or white). 20' maximum total surface height
including picture area.

Single motor low voltage control (LVC) - external.

Wireless Remote Control for LVC.

Radio Frequency Remote

Radio Frequency Range Extender available

Infrared Remote

Key Locking Cover Plate for 120V or LVC Switch.

Key Operated Switch for 120V only (NOTE: cannot be used
with LVC).

No Borders (Black masking borders standard).

220 Volt (50 Hz) Motor.

WHEN ORDERING, MARK APPROPRIATE SELECTIONS:
Select method of installation:

Type 1 and  2 - Offset or Flush Mounting

Type 3 - Extended Mounting

Select viewing surface:

Matte White

High Power

®

Greenguard

®

and Greenguard

®

Children and Schools

Certified.

Options:

Video Projector Interface Control - external.

External SCB-100 - RS-232 Serial Control Board

NET-100 Ethernet-Serial Adapter

White box (black standard).

White doors (brushed aluminum standard).

EXECUTIVE ELECTROL

®

Automatic Electric Projection Screen Model

DA-LITE SCREEN COMPANY, INC.

3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: [email protected]

Reviews: