Acto LX200 Owner'S Manual Download

Page: 55 / 60

Appendix

Indicators and projector condition

Check the indicators for projector condition.

Indicators

POWER WARNING LAMP

G/R

Projector condition

The projector is off. (The AC power cord is unplugged.)

The projector is stand- Press STANDBY to turn on the projector.

The projector is operating normally.

The projector is preparing for stand-by or the

projection lamp is being cooled down.

The projector cannot be turned on until cooling is completed and the

indicator stops blinking.

The projector is in Power control mode.

The temperature inside the projector is abnormally high.

The projector cannot be turned on.

When the projector is cooled down enough and the temperature returns to

normal, the POWER indicator lights red and the projector can be turned on.

(The WARNING indicator keeps blinking.)
The projector has been cooled down enough and the temperature returns

to normal. When turning on the projector, the WARNING indicator stops

blinking.

The projector detects an abnormal condition and cannot be turned on.

Unplug the AC power cord and plug it again to turn on the projector. If the

projector is turned off again, unplug the AC power cord and contact the

dealer or the service center for service and checkup. Do not leave the

projector on. It may cause an electric shock or a fire hazard.
The projection lamp reaches the end of its life. Replace a new one timely.

Green

Red

Yellow

Off

Flashes green

Flashes red

* When the projection lamp reaches the end of its life, the LAMP REPLACE indicator lights yellow. In this case, replace

the projection lamp with a new one promptly.

Summary of Contents for LX200





























































Search results

Summary of Contents for LX200

Reviews:

Related manuals for LX200

Brands by name

Popular brands

Acto LX200, Owner'S Manual

Search results

Summary of Contents for LX200

Reviews:

Related manuals for LX200

Brands by name

Popular brands