4
To the owner
Please read this manual completely before installing and
operating the projector.
The projector provides many convenient features and
functions. Proper operation may enable you to fully utilize
the features and keep it in good condition. Otherwise, it
will not only shorten the service life of the unit, but also
may cause malfunction, a fire, or other accidents.
If your projector cannot work properly, please read this
manual again, check the operating methods and cable
connection, and try the solutions in the part of
Troubleshooting. If the problem still exists, contact the
dealer or the service center.
The lamp of the projector is a wearing part. The luminance
may decrease after a period of operation and be weaker
than that of a new lamp. This is normal. Please strictly
follow the steps in Turning on the unit and Turning off the
unit to turn on/off the projector, and the requirements in
Maintaining and cleaning the projector to service and clean
the projector regularly. Or the high temperature residual
heat may not radiate, greatly shortening the service life of
the projector and lamp, or even damaging them within a
short period.
Caution
Electric shock
Do not open
Caution: To reduce the risk of electric shock, do not
remove the cover (or back). No user-
serviceable parts inside except lamp
replacement. Refer servicing to qualified
service personnel.
The sign indicates the danger of high voltage,
i.e., electric shock.
The sign indicates important operating and
maintenance instructions with the unit in the
manual.
Environment-friendly use conditions: The
environment-friendly life time of the
projector and remote control is 10 years, the
lamp (consumable) 5 years, and the
provided batteries (consumable) 5 years.
The use conditions of the environment-
friendly use period are the same with that of
the product. Properly operate and effectively
maintain the projector according to the
requirements in this manual.
Safety precautions
Warning:
The projector must be grounded.
Do not expose the projector to raindrops or high
humidity to avoid a fire or electric shock.
-- This projector produces intense light from the projection
lens. Avoid staring directly into the lens, otherwise eye
damage could be caused. Be especially careful that children
do not stare directly into the beam.
-- Place the projector in a proper position. Otherwise it may
result in fire hazard.
--Leave an appropriate space from the top, sides, and back of
the shell in order to ventilate and cool down the projector.
The figures below indicate the minimum distance to be left.
It must be satisfied if the projector is placed in sealed
environment like a cabinet.
Sides and top
Back
--Do not cover the vent of the projector. Poor radiation may
shorten the service life or even cause dangers.
--Remove the AC power plug if the projector is not to be
used for a long time.
--Do not project the same image for a long time; otherwise, a
residual image may appear on the LCD panel due to its
characteristic.
Caution
Do not set the projector in greasy, wet, or smoky conditions
such as in a kitchen, to prevent a malfunction or accident. If
the projector comes in contact with oil or chemicals, it may
become deteriorated.
Read and keep this manual for future reference.
10
20cm
50cm
1m
1m
