40
Setting
Display
Allows you to decide whether to display the on-screen displays.
On ............... Display all the on-screen display. Use this function when you want to project images after the lamp
becomes bright enough. This mode is set as default.
Off............... Do not show the on-screen displays.
Logo (Logo Select)
This function allows you to preset startup logo by functions of selecting a logo, capturing, locking logo PIN code and
changing logo PIN code.
√
Note: When this item is enabled, options of “Select a logo” and “Capture”
are unavailable.
Logo Select Decides the startup logo as follows.
User .... The image you captured.
Default .... The factory-set logo.
Off....... No logo.
Capture Enables you to capture the image being projected and use it for a startup
display or interval of presentations.
Upon capturing the projected image, press SELECT. A confirmation box appears.
Select Yes to capture it.
After capturing the projected image, go to “Select a logo” and set it to “User”. Then,
the captured image is displayed when the projector is turned on next time.
Logo PIN code lock
Allows you to prevent an unauthorized person from changing the screen logo.
Off ...... The screen logo can be changed freely from the “Startup logo” menu.
On ...... The screen logo cannot be changed without the logo PIN code.
If you want to change the logo PIN code setting, press SELECT to pop up the logo PIN code box. Follow the steps
below to enter a logo PIN code.
