17
Installation
Connecting the AC power cord
This projector uses nominal input voltages of 100–240V AC and
it automatically applies to different input voltages. It is designed
to work with a single-phase power system having a grounded
neutral conductor. To reduce the risk of electrical shock, do not
plug into any other type of power system. If you are not sure of
the type of power being supplied, consult your authorized dealer
or service station. Connect the projector with all peripheral
equipment before turning it on.
Connect the AC power cord (supplied) to the
projector.
Caution
The AC outlet should be near this equipment and must be easily accessible.
√
Note:
For safety, unplug the AC power cord when the
projector is not in use. When the projector is connected to
an outlet with AC power cord, it is in stand-by mode and
consumes a little electric power.
Note on the power cord
AC power cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If the supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector
side
AC outlet side
To power cord
connector on your
projector.
Ground
To the AC outlet (100
- 240 V AC)
√
Note:
Using incorrect power cord may influence the product performance, or even cause hazards like an electric shock or fire. To
ensure the product performance and security, please apply the cable of the same model with the original one.
Common connecting cables include the AC power cord, various VGA cables, audio cables, video cables, and serial control
cables.
