9
Part names and functions
Top control and indicators
(1) MENU button
To open or close the screen menu.
(2)
▲
/INPUT
◄
/
►
/
▼
(VOL +/-) buttons
--
▲
/INPUT: to select an input sauce
--To select an entry or adjust parameter in the screen menu.
--To move an image horizontally.
--To adjust the volume (VOL +/- button).
(6) SELECT button
--To access full menu operation in the shortcut menu.
--To perform the selected item.
--To zoom in or out an image in the digital zoom mode.
(7) AUTO SETUP button
To automatically correct vertical keystone distortion. When the signal
source is from a PC, press it to adjust fine sync, total dots, image position,
and other displayed parameters. When there is no signal input, press it to
automatically switch a channel for signal search.
(8) ON/STAND-BY button
To turn on/off the projector.
(9) POWER indicator
– Lights red when the projector is in stand-by mode.
– Lights green during operations.
– Flashes green in the Power control (standby) mode.
– Flashes red in cooling state.
(10) LAMP REPLACE indicator
Turns orange when the life of the projection lamp draws to an
end.
(11) WARNING indicator
Flashes red when the internal projector temperature is too high.
Top control
Indicators
⑦
⑨ ⑩ ⑪
⑥
⑧
①
②
②
②
②
