41
Setting
Reset the PIN code
Select a number by pressing
▲
/
▼
, and then press
►
to fix the number and move the cursor. The number changes to “*”.
If you fixed an incorrect number, move the cursor to the number you want to correct by pressing
◄
, and then select the
correct number by pressing
▲
/
▼
.
Repeat this step to enter a three-digit number.
After entering the three-digit number, move the cursor to “Set”. Press SELECT and you may start to operate the projector.
If you entered an incorrect PIN code, the startup logo PIN code and the number (***) turn red. Enter the correct logo PIN
code all over again.
Change the PIN code
Press
▲
/
▼
to switch between “On” and “Off”, and press
SELECT for confirmation.
Logo PIN code change
Logo PIN code can be changed to your desired three-digit
number. Press SELECT to select “Change the logo PIN code”.
The corresponding confirmation box pops up. Then, press
▲
/
▼
to enter a correct code. A dialog box of “New PIN
code” shows up. Set a new code and then a confirmation box
appears. Select “Yes” to set a new code.
Be sure to remember and keep the new PIN code. If you lost
the number, you could no longer change the logo PIN code
setting.
Caution:
When you have changed the logo PIN code, write down the
new doe in the “New code” column of the “Startup logo” on
P57, and keep it securely. Should the PIN code be lost or
forgotten, the startup logo PIN code can no longer be changed.
