39
Setting
Auto setup
Allows you to perform input search, auto PC adjustment and auto
keystone correction automatically, press the AUTOSET button on the
top control or remote control. The functions can be switched based on
the steps below.
Input search
Allows you to automatically detect input signals. It stops when a
signal is found. Press
▲
/
▼
to select an option from:
Off........Disabled.
On........Enabled. This function is used to detect input signals
automatically and stops when finding a signal.
Auto PC adj
On........Press the AUTOSET button on the top control or
remote control, and the auto PC adjustment function is
automatically activated.
Off........Deactivate.
√
Note:
●
If you press the INPUT button on the top
control or the PC, VIDEO, S-VIDEO, or
COMPONENT button on the remote control
when searching for an input source, the search
process will stop and the system will return to
the input signal used last time.
●
Fine synch, total dots and horizontal & vertical
positions of some computers can be fully
adjusted with the Auto PC Adjustment function.
When the image is not provided properly with
this function, manual adjustments are required.
Auto keystone
Off........Disabled.
Auto......To correct keystone distortion depending on the slope of
the projector all the time.
Manual ...... To enable the function by pressing AUTOSET
on the top control or remote control.
Keystone
Allows you to store or reset keystone correction of a projected
image after disconnecting the AC power. Press
▲
/
▼
to switch
between:
Store ........Store the keystone correction even when the AC
power cord is unplugged.
Reset .......Reset the keystone correction when the AC power
cord is unplugged.
Press SELECT for keystone correction. Now a keystone
correction menu appears on the screen. Press
▲
/
▼
to correct
keystone distortion.
Blue back
Allows you to select the screen background of the projector
when there is no signal detected. Press
▲
/
▼
to switch on/off.
On ........Enabled
Off ........Disabled
●
please use the keystone manually when the auto
keystone can not adjust the image square perfectly.
