SERIES APZU+ ACROPACK
USER’S MANUAL
Acromag, Inc. Tel: 248-295-0310
- 8 -
www.acromag.com
Figure 2 Block Diagram Model APZU-301/304
1.4 Signal Interface Products
Breakout Panel
5028-626
This AcroPack Module will mate directly to all Acromag AP carriers. Once
connected, the module is accessed via a 68 pin front panel connector.
The cables and termination panels are also available. The APZU Cable
Breakout panel (Model number 5028-626) will mate directly to all 68-pin
AcroPack Carriers. The breakout panel and short 68-pin male to male 1 foot
cable will bring an ethernet port, USB 2.0 port, UART to USB port, digital I/O
at jumper blocks, and power and reset buttons out to the field.
1.5 Software Support
The AcroPack series products require support drivers specific to your
operating system. Supported operating systems include: Linux, Windows,
and VxWorks
Quad SPI Flash
64MB/512Mb
LPDDR4
2 GByte
(512 x 32)
Ethernet MAC
Power Chip
MPSoC
XCZU3CG
Programmable Logic (PL)
PCIe
X1 lane
Ethernet
10/100/1000
USB 2.0
USB-UART
Boot Mode
SW2
AcroPack
I/O
50 Pin
MicroSD
(primary boot)
Processing System (PS)
(APZU-304)
14 LVDS I/O
I2C
28
Bank 65
(APZU-301)
28 TTL I/O (1.8V)
