Commissioning
65/ 122
Powerlift prefabricated pumping station
4.1.3 Changing the settings
Notes:
■
Settings can only be changed in service mode. If Service mode is not activated the
settings are displayed, but cannot be changed or saved.
■
If no entry is made within 20 seconds the display automatically switches back to the
basic setting.
■
Operating hours and pump starts can be displayed but not changed.
Procedure:
Î
Turn the “Display” rotary knob until the required menu item is displayed.
Î
Press the "Acknowledge selection” button. The most recently saved setting begins to
flash.
Î
Turn the rotary “Display” knob to change the setting (fast turning for a rough setting,
slow turning for a fine setting).
Î
Press the “Acknowledge selection” button to save the setting.
4.2 Level Control PS 2 Control System
Will be utilised in combination with the following pumps, Chapter 2.1.2 “Accessories”.
4.2.1 Controls and display elements
5
6
7
11
10
9
8
1
2
3
4
13
12
