Installation
45/ 122
Powerlift prefabricated pumping station
Closed back pressure bell
The closed back pressure bell with 40 m control cable will be assembled on the probe bracket.
Î
Lift the cover out of the cover frame and
store to the side.
Î
Lower the closed back pressure bell in
the tank.
Î
Insert the chain through the drill hole (
●
)
of the probe bracket (1).
Î
Adjust the back pressure bell to
distance measurement
25 cm
to the tank base (2).
Î
Fix the chain with the shackle on the
probe bracket (3).
25 cm
25 cm
2.
1.
3.
Î
Guide the control cable into the recess
(
●
) of the probe bracket (1).
Î
Pull the control cable through by means
of a PG screw and fix it with a PG screw
on the probe bracket (2).
1.
2.
