Acer Altos G710, User Manual

Page: 159 / 198

149
(3) Pull the stands from the server (3) .
3 Remove the inner rails from the mounting rails by following the
steps below:
Note: The rack mount kit contains a bag of screws, two sets of
side handles, rack brackets and mounting rails. The side handles
are attached to the sides of the server. The rack brackets attach
the mounting rails to the server. The mounting rails allow the
server to slide in and out of the rackmount for maintenance
purposes. Each mounting rail consists of: inner rail, middle slide,
and fixed outer rail. The fixed outer piece is screwed onto the rack
bracket with a M4 x L8 metal screw and nut, an inner rail is
attached to the sides of the server with the #8-32 screws and an
middle sliding piece controlled by a steel ball gearing movement.
(1) Extend the inner rail from the mounting rail until the rail
release latch clicks.