Acer Altos G710, User Manual

Page: 87 / 198

77
4 Remove the bezel. Refer to “Removing the bezel” on page 42 for
instructions.
5 Remove the ePanel module cover from the bezel by the following
steps:
(1) Remove the two screws that hold the module cover to the
bezel (1) . Set the screws aside.
(2) Remove the module cover (2) . Set the cover aside.
6 Remove the ePanel module and cables from its protective
packaging.
7 Route the following cables to the appropriate chassis openings:
(1) ePanel cable — Connect to the ePanel connector on the
mainboard (1, 3, 4) .
(2) ePanel power cable — Connect to any of the system’s power
cables (2, 5) .
8 Attach the other end of the ePanel cable to the module’s ePanel
connector
(6) .