Acer Altos 9100 Series, User Manual

Page: 21 / 162

AcerAltos 9100 Series User’s Guide
1-8
4. Remove any expansion boards or peripherals that block access to components
you are installing.
5. See the following sections for specific instructions on the component you wish
to install.
Do not attempt the procedures described in
the following sections unless you are a
qualified service technician.
1.5.3 Post-installation Instructions
Observe the following procedures after installing a system component:
1. See to it that the components are installed according to the instructions in their
respective sections.
2. Make sure you have set all the required jumpers. See section 1.4.2 for the
correct jumper settings.
3. Replace any expansion boards or peripherals that you removed earlier.
4. Replace the system cover.
5. Connect the necessary cables and turn on the system.
Always observe the following electrostatic discharge (ESD) precautions before
installing a system component:
1. Do not remove a component from its antistatic packaging until you are ready
to install it.
2. Wear a wrist grounding strap before handling electronic components. Wrist
grounding straps are available at most electronic component stores.
Do not attempt the procedures described in the
following sections unless you are a qualified
technician.