manualshive.com logo in svg

Acer Altos 9100 Series, User Manual

Share
Download
Acer Altos 9100 Series User Manual Download Page 156

P/N 46.AA989.002 Rev B

(3

 

of 9)

October 10, 1997

Do the following:

1.  Download 4GBFIX.EXE from the Novell web site

(http://developer.novell.com/devres/system/revj/trouble/index.htm) to a
blank diskette.

2.  Run 4GBFIX.EXE to uncompress the file(s) to a diskette.  Follow the

instructions contained in the readme.txt file for NetWare installation.

SCO OpenServer Notes

SCO OpenServer 5.0.2

Intel EtherExpress Pro 10/100 B PCI NIC

The driver built into SCO OpenServer 5.0.2 AHS for an Intel Pro/100 card should
not be used.  This driver needs to be removed first (Intel Ether Express PRO/100B
LAN Adapter).  After removing the driver, install Intel's SCO driver diskette,
included in the server software box.

3COM 3C905 10/100 NIC

Use the 3C905 SCO MDI driver included in Acer StartUp.  The driver diskette is
generated from the Diskette Maker utility in Acer StartUp.

Video ATI Mach64 PCI

After adding more memory you may experience video problems (such as the SCO
login screen blanking out or seeing a mouse trail on your screen).  If this happens,
invoke "mkdev graphics" to choose the driver and finish the video
reconfiguration.  This should correct the problem.

Summary of Contents for Altos 9100 Series



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands