Chapter
6 Monitoring and Diagnostics
Installation and Operation Manual
6-16
Monitoring Performance
ACE-3105, ACE-3205 Ver. 5.2
ACE-3205 – RAD Data Communications
Monitoring> Physical Layer> Port> E1
LOS ... (0) BES ... (0)
LOF ... (0) DM ... (0)
LCV ... (0) ES ... (0)
LCD ... (0) SES ... (0)
RAI ... (0) UAS ... (0)
AIS ... (0) RX frame slips ... (0)
FEBE ... (0)
Time elapsed ... (100)
Valid intervals ... (1)
1. Interval ... (0)
2. Port number ... (1)
>
Please select item <1 to 2>
F-Forward; ^F-Forward Internal
ESC-Previous menu; !-Main menu; &-Exit
Figure
6-16. E1/T1 Statistics and Menu
³
To view the connection statistics of a different port:
•
From the E1 menu (displayed below the current statistics data), select
Port Number and then type the port number.
³
To view the connection statistics of a previous time interval:
•
From the E1 menu, select Interval and then type the number of the
15-minute interval, which statistics you want to display (a value between
1 to 24).
³
To view the connection status of another E1/T1 port:
•
Select Port number and enter the required port number.
The current active interval is always marked as interval 0, while the previous
interval is marked as 1 and so on.
Table
6-13. E1/T1 Statistics Parameters
Parameter Description
Possible
Values
LOS
Number of seconds during which Loss Of
Signal was detected.
Numerical
LOF
Number of seconds during which Loss Of
Frame was detected.
Note: LOF is not available in Unframed
E1/T1 mode.
Numerical
Note
