AccuWeb EVO 150, Instruction Manual

Page: 8 / 137

EVO 150 Controller 6
2. EVO 150 Controller Assembly
•
Single-board design
•
Optional din rail mounting
•
Auto-recovery after power interruption
•
Non-volatile memory for user-settable parameters and operating modes
•
On-board Ethernet programming port
•
Two edge detector inputs for centerline guiding
•
PWM motor drive:
Brushed and brushless motors
20 kHz switching frequency
120 watts continuous output power, 24 volts at 5 amps
15 amp peak current limit
Thermistor-based over-temperature protection
•
Actuator end-of-travel inputs:
Potentiometer input for electronically-adjustable limits
Limit switch inputs for fixed limits
•
Inhibit input
•
Input voltage: 24 DC
3. EVO 150 Enclosure
•
Low profile
•
Environmentally-sealed function switches
•
External mounting feet
4. AccuWeb Linear Actuator
•
Available with brush DC and brushless motors up to 150 watts.
•
Available with standard stroke lengths up to
±
6” [
±
152mm] (other lengths available upon
request)
•
Available with limit switches or potentiometer for sensing end-of-travel limits and servo-
center position
5. Remote Station (optional)
•
Rugged, ultra-compact housing
•
Remote guide point adjustment or remote access to digital line guide’s front panel
•
Environmentally-sealed function switches and display