AccuWeb EVO 150, Instruction Manual, Page: 76 / 137

AccuBeam 3 Digital Line Guide Sensor 74
Maximum Center (Tracking Parameter)
M a x C e n t e r 1 2 7 This parameter specifies the maximum acceptable width of
the registration line. This parameter is not used when
tracking an edge.
The default value is 127.
Range: 0 to 127 half-pixels
Note: A setting of 127
disables
this Min/Max rule.
Note: A “pixel” is equivalent to 0.0049” [0.124mm].
Minimum Center (Tracking Parameter)
M i n C e n t e r 0 This parameter specifies the minimum acceptable width of
the registration line. This parameter is not used when
tracking an edge.
The default value is 0.
Range: 0 to 127 pixels
Note: A setting of 0
disables
this Min/Max rule.
Note: A “pixel” is equivalent to 0.0049” [0.124mm].
Maximum Right (Tracking Parameter)
M a x R i g h t 1 2 7
This parameter specifies the maximum acceptable width of
the area located to the right of the registration line or edge.
The default value is 127.
Range: 0 to 127 half-pixels
Note: A setting of 127
disables
this Min/Max rule.
Note: A “pixel” is equivalent to 0.0049” [0.124mm].
Minimum Right (Tracking Parameter)
M i n R i g h t 0 This parameter specifies the minimum acceptable width of
the area located to the right of the registration line or edge.
The default value is 0.
Range: 0 to 127 pixels
Note: A setting of 0
disables
this Min/Max rule.
Note: A “pixel” is equivalent to 0.0049” [0.124mm].