AccuEnergy AcuRev 2000, User Manual

Page: 26 / 270

18
Display Module Installtion
The Display Module is factory installed on the meter base. Users can use the meter base
and display module combination directly. The following steps show how Display Module is
installed.
1)Firstly, make a standard panel Cut Out as the Figure 2-16 shows. Unit: mm.
Figure 2-16 Cut Out dimensions
2)Remove the clips of Display Module, install the module into the Cut Out in the direction
of arrow.
Figure 2-17 Insert Display Module into the Cut Out
+0.5
-0.0
+0
.5
-0
.0
68
68
Panel
Panel