AccuEnergy AcuRev 2000, User Manual

Page: 206 / 270

198
2. Set the max record number and Offset to the meter. Initially the Offset is 0. In this
example, set 0x0A0B and 0x0000 to 0x3B01 and 0x3B02.
3. Read the Window Status from 0x3B01, if the status says 0xFF, then go to step 2 to set max
record number and Offset again. If the status says 0x0B, the content of the window will be
read.
4. Read the window content and calculate the next record offset. The next record offset is
the last record offset plus the max record number per window. After completing, set the
new offset to 0x3B02.Then repeat step 3 until all the records are retrieved.
Basic Measurement
AcuRev 2010 only takes power related measurements. The format is floating point. Each
parameter uses 4 bytes, high bytes are followed by low bytes. Function Code: 03.Read only.
Address Parameter Property
Alarm parameter
label
Default
Data
Type
2000H-2001H F R 0 float
2002H-2003H U1 R 1 float
2004-2005H U2 R 2 float
2006-2007H U3 R 3 float
2008-2009H Uavg R 4 float
200AH-200BH U12 R 5 float
200CH-200DH U23 R 6 float
200EH-200FH U31 R 7 float
2010H-2011H Ulavg R 8 float
2012H-2013H
IL1(Phase A inline
current)
R 9 float
2014H-2015H
IL2(Phase B inline
current)
R 10 float