AccuEnergy AcuRev 2000, User Manual

Page: 137 / 270

129
P07 Modbus
TCP/IP Port
0502
Figure 5-8
10. Set HTTP port in the eighth setting page, such as 80. Press the “OK” key to go to the
setting page. The cursor starts at the first digit. After setting the HTTP port, press the “OK”
key to accept. Press the “
 ” key to go to the ninth setting page for the reset mode. The
HTTP port's default value is 80, and the user defined range of port is 6000~9999. If the set
port is not in the correct range, the set port will return to the default value.
P08 Http port
0080
Figure 5-9
11. Set resetting mode in the ninth setting page. Select “RESET” to reset the module.
Selecting “NO” will not reset the module. Selecting "DEFAULT" will load the module
with default settings and reset module. Press the “OK” key to go to the setting page.
Press “
 ” key or “  ” key to select configuration mode, press the “OK” key to accept.
Note: When configuring Ethernet module settings completely, users must select
“RESET” to restart module and new settings will take effect.
P09 Ethenet RESET
NO
Figure 5-9