AccuEnergy AcuRev 2000, User Manual

Page: 147 / 270

139
Table 5-25 Preset Multi-Registers Response Message
Transaction
identifier hi
Transaction
identifier lo
Protocol
identifier hi
Protocol
identifier lo
Length hi Length lo
Unit
identifier
00H 00H 00H 00H 00H 06H 01H
Fun Data start reg hi Data start reg lo Data #of regs hi Data #of regs lo
10H 10H 08H 00H 02H
Users may refer to the sixth chapter “Communication” and get the details of AcuRev 2000
series meter.
When using Modbus/TCP function, it is best to set the Scan interval of the software to
under 1000 ms.
When using Third Party software, it is best to set Frame interval for the Modbus-TCP
function to under 1000 ms.
5.3.9 Webpage Browsing and Parameter Settings
The Ethernet module supports HTTP protocol and has a Web Server function making the
AcuRev 2000 series meter accessible through Ethernet at anytime from anywhere.
The Ethernet module supports IE Browser 6.0 and higher editions and the Webpage
Settings only support ASCII characters.
The IP address will be referred to as "192.168.1.200" for the remainder of this chapter.
1. Main page
Users enter the correct IP address and HTTP port of the module in the address bar of the
web browser. This provides access to "Data", "Settings" and "Module Status".